LTX-2.5 on H100 SXM: VRAM, speed and fit
LTX-2.5 at 16-bit runs on the H100 SXM, about 26 s per clip.
Video generation · 960 × 544
Runs comfortably · on H100 SXM · 16-bit (BF16)
- GPU memory
- 40.4 GB
- of 80.0 GB
- Time
- 26 s
- per clip
Where the memory goes
- Model
- 39.1 GB
- Working
- 542 MB
- Overhead
- 819 MB
- OS
- 0.0 GB
- Free
- 39.6 GB
- Memory
- 40.4 GB of 80.0 GB
- Output
- 960 × 544 · 121 frames · 8 steps
- Time
- 26 s per clip
- Running cost
- $16/mo at home · $72/mo on a cloud A40
Validation: Validated
| Check | Target | Result | Status |
|---|---|---|---|
| Fits in GPU memory | 80.0 GB usable | 40.4 GB needed | Pass |
| Headroom | 5% free | 39.6 GB free (49%) | Pass |
| Time per clip | under 15 min | 26 s | Pass |
Targets: a clip in under 15 min, and 5% of memory left free. Calculated from published specs, not benchmarked.
The setup
- Model
- LTX-2.5
- Parameters
- 21B
- Precision
- 16-bit (BF16)
- Output
- 960 × 544, 121 frames
- Steps
- 8
- Hardware
- H100 SXM
- GPU can use
- 80.0 GB of 80.0 GB
Running cost
- At home
- $16/mo
- 710 W at the wall, under $0.001 a clip
- Renting instead
- $72/mo
- A40 at $0.59/h, $0.009 a clip
4 h a day, power at $0.18 per kWh, cloud at RunPod on-demand prices as of Nov 21, 2026.
Where to get it
LTX-2.5 on similar machines
- A100 80 GB SXMRuns
All machines: LTX-2.5 VRAM requirements. Everything that runs here: what can the H100 SXM run?
Other models that run on H100 SXM
Questions
Can LTX-2.5 run on H100 SXM?
LTX-2.5 at 16-bit runs on the H100 SXM, about 26 s per clip.
Report VR-13SR8RK, calculated Nov 22, 2026 from published specs, not benchmarked.