Qwen-Image 2.1 on RTX 3090: VRAM, speed and fit
Qwen-Image 2.1 at 16-bit runs on the RTX 3090, about 3.5 min per image.
Image generation · 2048 × 2048
Runs comfortably · on RTX 3090 · 16-bit (BF16)
- GPU memory
- 15.1 GB
- of 24.0 GB
- Time
- 3.5 min
- per image
Where the memory goes
- Model
- 13.3 GB
- Working
- 1.0 GB
- Overhead
- 819 MB
- OS
- 0.0 GB
- Free
- 8.9 GB
- Memory
- 15.1 GB of 24.0 GB
- Output
- 2048 × 2048 · 40 steps
- Time
- 3.5 min per image
- Running cost
- $8.65/mo at home · $29/mo on a cloud RTX 2000 Ada
Validation: Not validated
| Check | Target | Result | Status |
|---|---|---|---|
| Fits in GPU memory | 24.0 GB usable | 15.1 GB needed | Pass |
| Headroom | 5% free | 8.9 GB free (37%) | Pass |
| Time per image | under 30 s | 3.5 min | Fails |
Targets: an image in under 30 s, and 5% of memory left free. Calculated from published specs, not benchmarked.
The setup
- Model
- Qwen-Image 2.1
- Parameters
- 7.1B
- Precision
- 16-bit (BF16)
- Output
- 2048 × 2048
- Steps
- 40
- Hardware
- RTX 3090
- GPU can use
- 24.0 GB of 24.0 GB
Running cost
- At home
- $8.65/mo
- 395 W at the wall, $0.004 an image
- Renting instead
- $29/mo
- RTX 2000 Ada at $0.24/h, $0.02 an image
4 h a day, power at $0.18 per kWh, cloud at RunPod on-demand prices as of Nov 22, 2026.
Where to get it
Qwen-Image 2.1 on similar machines
- RTX 4080 SuperRuns
- RTX 5070 TiRuns
- RTX 5080Runs
- Radeon RX 7900 XTXRuns
- RTX 4090Runs
- Radeon AI PRO R9700Runs
- RTX 5090Runs
All machines: Qwen-Image 2.1 VRAM requirements. Everything that runs here: what can the RTX 3090 run?
Other models that run on RTX 3090
Questions
Can Qwen-Image 2.1 run on RTX 3090?
Qwen-Image 2.1 at 16-bit runs on the RTX 3090, about 3.5 min per image.
Report VR-1PC0GTP, calculated Nov 22, 2026 from published specs, not benchmarked.