Qwen-Image 2.1 on RTX 3080 10 GB: VRAM, speed and fit
Qwen-Image 2.1 at 8-bit runs on the RTX 3080 10 GB, about 4.2 min per image.
Image generation · 2048 × 2048
Runs comfortably · on RTX 3080 10 GB · 8-bit (FP8 · Q8_0)
- GPU memory
- 8.7 GB
- of 10.0 GB
- Time
- 4.2 min
- per image
Where the memory goes
- Model
- 6.9 GB
- Working
- 1.0 GB
- Overhead
- 819 MB
- OS
- 0.0 GB
- Free
- 1.3 GB
- Memory
- 8.7 GB of 10.0 GB
- Output
- 2048 × 2048 · 40 steps
- Time
- 4.2 min per image
- Running cost
- $8.05/mo at home · $29/mo on a cloud RTX 2000 Ada
Validation: Not validated
| Check | Target | Result | Status |
|---|---|---|---|
| Fits in GPU memory | 10.0 GB usable | 8.7 GB needed | Pass |
| Headroom | 5% free | 1.3 GB free (13%) | Pass |
| Time per image | under 30 s | 4.2 min | Fails |
Targets: an image in under 30 s, and 5% of memory left free. Calculated from published specs, not benchmarked.
The setup
- Model
- Qwen-Image 2.1
- Parameters
- 7.1B
- Precision
- 8-bit (FP8 · Q8_0)
- Output
- 2048 × 2048
- Steps
- 40
- Hardware
- RTX 3080 10 GB
- GPU can use
- 10.0 GB of 10.0 GB
Running cost
- At home
- $8.05/mo
- 368 W at the wall, $0.005 an image
- Renting instead
- $29/mo
- RTX 2000 Ada at $0.24/h, $0.02 an image
4 h a day, power at $0.18 per kWh, cloud at RunPod on-demand prices as of Nov 22, 2026.
Where to get it
Qwen-Image 2.1 on similar machines
- RTX 4060Just misses
- RTX 5060Just misses
- RTX 3070Just misses
- RTX 3060 12 GBRuns
- Arc B580Runs
- RTX 4070Runs
- RTX 4070 SuperRuns
All machines: Qwen-Image 2.1 VRAM requirements. Everything that runs here: what can the RTX 3080 10 GB run?
Other models that run on RTX 3080 10 GB
Questions
Can Qwen-Image 2.1 run on RTX 3080 10 GB?
Qwen-Image 2.1 at 8-bit runs on the RTX 3080 10 GB, about 4.2 min per image.
Report VR-0DR3BSO, calculated Nov 22, 2026 from published specs, not benchmarked.